Carburettors / Intake devices / Air filters

MZA-Artikelnr.:   Mza    

New carburettor Bing for MZ TS250. These carburettors are produced as a substitute of the genuine parts. In the processing and behaviour these are to the original consider. The carburettor is regulated well and stop. He is delivered ready with installation and preset. The recommended retail price lies with about 146.00 euros. Also as a substitute with carburettor BVF. As the only you must change the starter pull. The external casing is too long and must be shortened. For a surcharge of 6.85€ you can coorder such a Bowden cable. The installation is also easy for the "nonexpert" and is uncomplicated. A low consumption and a very easy setting are the biggest advantages of this carburettor. The engine promptly reacts to the smallest change of the settings. Thereby you can seat easily bigger nozzles, for example, to the increase in output. The processing is exemplary and exact. The springs are strong and from the best spring steel. The work-sided opposed float situation please do not change; you can change all the other settings fast, but please only gradually. Technical data: - Bing bar carburettor 84/30/110, anew, made in Germany - connection Putting in the suction connecting piece to the cylinder, 40 mm - connection air filter 52 mm - passage 30 mm - for 1-cylinder 2-cycle - main nozzle 118 (corresponds to the original with 250 cubic centimetres). Scope of supply: - (With it you can reorder carburettor as described, preset - exploded view with spare part list - installation instructions - data sheet and description - unique service number still after years). - 2-year guarantee on material and manufacturers mistake, except wear - It are necessary no rebuildings in your MZ. With some models the external cover in the starter pull must be shortened, all the other parts, tackles and connections fit.

DETAILS

MZA-Artikelnr.:   16368-A-M    

New carburettor Bing for MZ IT 250 and IT 250/1. These carburettors are produced as a substitute of the genuine parts. In the processing and behaviour these are to the original consider. The carburettor is regulated well and stop. He is delivered ready with installation and preset. The carburettor is produced by us from a standard carburettor. He is not available therefore in trade. And is made as a substitute with the original BVF. As the only you must change the starter pull. The external casing is too long and must be shortened. For a surcharge of 6.85? if you can coorder such a Bowden cable. The installation is also easy for the "nonexpert" and is uncomplicated. A low consumption and a very easy setting are the biggest advantages of this carburettor. The engine promptly reacts to the smallest change of the settings. Thereby you can seat easily bigger nozzles, for example, to the increase in output. The processing is exemplary and exact. The springs are strong and from the best spring steel. The work-sided opposed float situation please do not change; you can change all the other settings fast, but please only gradually. Technical data: - Bing bar carburettor 84/30/110, anew, made in Germany connection Putting in the suction connecting piece to the cylinder, 35 mm - connection air filter 45 mm - passage 30 mm - for 1-cylinder 2-cycle - main nozzle 118 (corresponds to the original with 250 cubic centimetres). Scope of supply: - (With it you can reorder carburettor as described, preset - exploded view with spare part list - installation instructions - data sheet and description - unique service number still after years). - 2-year guarantee on material and manufacturers mistake, except wear - It are necessary no rebuildings in your MZ. With some models the external cover in the starter pull must be shortened, all the other parts, tackles and connections fit.

DETAILS

New carburettor BING for MZ, row TS 125/150 with 32 mm of clamp connection to the cylinder intake socket. These carburettors are produced as a substitute of the genuine parts. In the processing and behaviour these are to the original consider. The carburettor is regulated well and stop. He is delivered ready with installation and preset. The recommended retail price lies with about 146.00 euros. Also as a substitute with carburettor BVF. This model of the row 53-201 is the unthrottled implementation with full power strength, by 14,5-HP implementation absolutely necessarily! The row 53-202 is for 125 cubic centimetres or lower power strength and throttled engines. A low consumption and a very easy setting are the biggest advantages of this carburettor. The engine promptly reacts to the smallest change of the settings. Thereby you can seat easily bigger jets, e.g., to the increase in output. The processing is exemplary and exact. The springs are strong and from the best spring steel. The work-sided opposed float situation please do not change; you can change all the other settings fast, but please only gradually. Technical data: - Bing bar carburettor 53/24/201, anew, maggot in Germany - clamp connection on the suction connecting piece to the cylinder, 32 mm - connection air filter 40 mm - passage 24 mm - for 1-cylinder 2-cycle - main jet105 (corresponds to the original with 150 cubic centimetres). Scope of supply: - (With it you can reorder carburettor as described, preset - exploded view with spare part list - installation instructions - data sheet and description - unique service number still after years). - 2-year guarantee on material and manufacturers mistake, except wear - It are necessary no rebuildings in your  MZ. With some models the external cover in the starter pull must be shortened, all the other parts, tackles and connections fit.
DETAILS

MZ number: similar 80-30.527, 80-30.511

MZA-Artikelnr.:   16368-A-M    

New carburettor Bing for all MZ with 250 cubic centimetres of cubic capacity. Special in this model is the clamp connection. With all ES250 / 1 the carburettor on the connecting piece was put to the cylinder. Besides, the external diameter of the connecting piece amounts serially to 35 mm. However, this connecting piece became used also (even if seldom) with the TS250 or models ETZ250. These carburettors are produced as a substitute of the genuine parts and are modified by us. In the processing and behaviour these are to the original consider. The carburettor is regulated well and stop. He is delivered ready with installation and preset. There is this model not to shop in this issue, otherwise. Also as a substitute with carburettor BVF. As the only you must change the starter pull. The external casing is too long and must be shortened. For a surcharge of 6.85€ you can coorder such a Bowden cable. The installation is also easy for the "nonexpert" and uncomplicated.i A low consumption and a very easy setting are the biggest advantages of this carburettor. The engine promptly reacts to the smallest change of the settings. Thereby you can seat easily bigger nozzles, e.g., to the increase in output. The processing is exemplary and exact. The springs are strong and from the best spring steel. The work-sided opposed float situation please do not change; you can change all the other settings fast, but please only gradually. Technical data: - Bing bar carburettor 84/30/110 K, anew, made in Germany - clamp connection on the suction connecting piece to the cylinder, 35 mm - connection air filter 52 mm - passage 30 mm - for 1-cylinder 2-cycle - main nozzle 118 (corresponds to the original with 250 cubic centimetres). Scope of supply: - (With it you can reorder carburettor as described, preset - exploded view with spare part list - installation instructions - data sheet and description - unique service number still after years). - 2-year guarantee on material and manufacturers mistake, except wear - It are necessary no rebuildings in your MZ. With some models the external cover in the starter pull must be shortened, all the other parts, tackles and connections fit. The carburettor cover with ES - to models must be filed something, then this fits again!

DETAILS

MZA-Artikelnr.:   Mza    

New carburettor Bing for all MZ with 300 cubic centimetres of cubic capacity. Special in this model is the clamp connection. With all ES300 / 1 the carburettor on the connecting piece was put to the cylinder. Besides, the external diameter of the connecting piece amounts serially to 35 mm. These carburettors are produced as a substitute of the genuine parts and are modified by us. In the processing and behaviour these are to the original consider. The carburettor is regulated well and stop. He is delivered ready with installation and preset. There is this model not to shop in this issue, otherwise. Also as a substitute with carburettor BVF. As the only you must change the starter pull. The external casing is too long and must be shortened. For a surcharge of 6.85? if you can coorder such a Bowden cable. The installation is also easy for the "nonexpert" and is uncomplicated. A low consumption and a very easy setting are the biggest advantages of this carburettor. The engine promptly reacts to the smallest change of the settings. Thereby you can seat easily bigger nozzles, e.g., to the increase in output. The processing is exemplary and exact. The springs are strong and from the best spring steel. The work-sided opposed float situation please do not change; you can change all the other settings fast, but please only gradually. Technical data: - Bing bar carburettor 84/30/110-K1, anew, made in Germany - clamp connection on the suction connecting piece to the cylinder, 35 mm - connection air filter 52 mm - passage 30 mm - for 1-cylinder 2-cycle - main nozzle 125 (corresponds to the original with 300 cubic centimetres). Scope of supply: - (With it you can reorder carburettor as described, preset - exploded view with spare part list - installation instructions - data sheet and description - unique service number still after years). - 2-year guarantee on material and manufacturers mistake, except wear - It are necessary no rebuildings in your MZ. With some models the external cover in the starter pull must be shortened, all the other parts, tackles and connections fit. The carburettor cover with ES - to models must be filed something, then this fits again!

DETAILS

MZA-Artikelnr.:   Mza    

New carburettor Bing for MZ ETS250 and ES250/2. These carburettors are produced as a substitute of the genuine parts. In the processing and behaviour these are to the original consider. The carburettor is regulated well and stop. He is delivered ready with installation and preset. The carburettor is produced by us from a standard carburettor. He is not available therefore in trade. And is made as a substitute with the original BVF. As the only you must change the starter pull. The external casing is too long and must be shortened. For a surcharge of 6.85 euros you can coorder such a Bowden cable. The installation is also easy for the "nonexpert" and is uncomplicated. A low consumption and a very easy setting are the biggest advantages of this carburettor. The engine promptly reacts to the smallest change of the settings. Thereby you can seat easily bigger nozzles, e.g., to the increase in output. The processing is exemplary and exact. The springs are strong and from the best spring steel. The work-sided opposed float situation please do not change; you can change all the other settings fast, but please only gradually. Technical data: - Bing bar carburettor 84/30/110, anew, made in Germany - connection Putting in the suction connecting piece to the cylinder, 35 mm - connection air filter 45 mm - passage 30 mm - for 1-cylinder 2-cycle - main nozzle 118 (corresponds to the original with 250 cubic centimetres). Scope of supply: - (With it you can reorder carburettor as described, preset - exploded view with spare part list - installation instructions - data sheet and description - unique service number still after years). - 2-year guarantee on material and manufacturers mistake, except wear - It are necessary no rebuildings in your MZ. With some models the external cover in the starter pull must be shortened, all the other parts, tackles and connections fit.

DETAILS

MZA-Artikelnr.:   16368-A-M    

New carburettor Bing, original, German production. This model was inserted serially with Saxon MZ 251. The carburettor is regulated well and stop. He is delivered ready with installation and preset. The recommended retail price lies with about 146.00 euros. The installation is also easy for the "nonexpert" and is uncomplicated. A low consumption and a very easy setting are the biggest advantages of this carburettor. The engine promptly reacts to the smallest change of the settings. Thereby you can seat easily bigger nozzles, e.g., to the increase in output. The processing is exemplary and exact. The springs are strong and from the best spring steel. The work-sided opposed float situation please do not change; you can change all the other settings fast, but please only gradually. Technical data: - Bing bar carburettor 84 / 30 / 110K, anew, made in Germany - clamp connection in the suction connecting piece to the cylinder, the clamp clamp is on the carburettor. - Connection air filter 52 mm - passage 30 mm - for 1-cylinder 2-cycle - main nozzle 118 (corresponds to the original with 250 cubic centimetres). Scope of supply: - (With it you can reorder carburettor as described, preset - exploded view with spare part list - installation instructions - data sheet and description - unique service number still after years). - 2-year guarantee on material and manufacturers mistake, except wear.

DETAILS

MZA-Artikelnr.:   Mza    

New carburettor Bing, original, German production. This model was inserted serially with Saxon MZ 301. The carburettor is regulated well and stop. He is delivered ready with installation and preset. The recommended retail price lies with about 146.00 Euro. The installation is also easy for the "nonexpert" and is uncomplicated. A low consumption and a very easy setting are the biggest advantages of this carburettor. The engine promptly reacts to the smallest change of the settings. Thereby you can seat easily bigger nozzles, e.g., to the increase in output. The processing is exemplary and exact. The springs are strong and from the best spring steel. The work-sided opposed float situation please do not change; you can change all the other settings fast, but please only gradually. Technical data: - Bing bar carburettor 84 / 30 / 110K, anew, made in Germany - clamp connection in the suction connecting piece to the cylinder, the clamp clamp is on the carburettor. - Connection air filter 52 mm - passage 30 mm - for 1-cylinder 2-cycle - main nozzle 125 (corresponds to the original with 300 cubic centimetres). Scope of supply: - (With it you can reorder carburettor as described, preset - exploded view with spare part list - installation instructions - data sheet and description - unique service number still after years). - 2-year guarantee on material and manufacturers mistake, except wear.

DETAILS

New carburettor Bing for MZ, row TS 125 with 30 mm of clamp connection to the cylinder connecting piece. These carburettors are produced as a substitute of the genuine parts. In the processing and behaviour these are to the original consider. The carburettor is regulated well and stop. He is delivered ready with installation and preset. The recommended retail price lies with about 146.00 euros. Also as a substitute with carburettor BVF. This model of the row 53-201 is the unthrottled implementation with full power strength, by 14,5-HP implementation absolutely necessarily! The row 53-202 is for 125 cubic centimetres or lower power strength and throttled engines. A low consumption and a very easy setting are the biggest advantages of this carburettor. The engine promptly reacts to the smallest change of the settings. Thereby you can seat easily bigger nozzles, for example, to the increase in output. The processing is exemplary and exact. The springs are strong and from the best spring steel. The work-sided opposed float situation please do not change; you can change all the other settings fast, but please only gradually. Technical data: - Bing bar carburettor 53/24/201, anew, made in Germany - clamp connection on the suction connecting piece to the cylinder, 28 mm - connection air filter 40 mm - passage 24 mm - for 1-cylinder 2-cycle - main nozzle 105 (corresponds to the original with 150 cubic centimetres). Scope of supply: - (With it you can reorder carburettor as described, preset - exploded view with spare part list - installation instructions - data sheet and description - unique service number still after years). - 2-year guarantee on material and manufacturers mistake, except wear - It are necessary no rebuildings in your MZ. With some models the external cover in the starter pull must be shortened, all the other parts, tackles and connections fit.

DETAILS

MZ number: similar 80-30.527, 80-30.511

New clamp ring for the carburettor BVF suitably with all MZ TS125, TS150, ETZ125 and ETZ150.

DETAILS

MZ number: 80-30.126

Clamp ring for suction rubber carburettor of the models ETZ 125/150, ES175 / 2, ES250 / 2, ETS250.

DETAILS

MZ number: 16-28.161

Clamp ring for suction rubber to the carburettor of the models TS250 / 1 and ETZ 250/251/301.

DETAILS

MZ number: 22-33.034

Connection piece of the air filter to the carburettor. For ETZ250 and ETZ251, ETZ301. Suction connecting pieces in original quality.

DETAILS

MZ number: 30-33.030

Suction rubber, suitably for models MZ of the models ES175, ES250 and ES250 / 1.

DETAILS

New connection piece to the carburettor suitably for all MZ ETZ125 and ETZ150.

DETAILS

MZ number: 32-33.020

Elastic flexible tubing between the air filter and the carburettor of the TS 250 - models.

DETAILS

MZ number: 22-33.032

Elastic flexible tubing between the air filter and the carburettor suitably with all MZ ES125, ES150, TS125 and TS150.

DETAILS

MZ number: 13-28.072

Locking lid with seal, black varnishes. Suitably to the air filter cabinet ETZ125, ETZ150, ETZ250, ETZ251, ETZ301.

DETAILS

MZ number: 30-33.075

Cover for air filter of the models TS125 and TS150. These caps were obstructed with the first models original. Material: Plastic

DETAILS

MZ number: 13-28.094

Neuer Deckel zum Gehäuse für Ansauggeräuschdämpfer (Luftfilterkasten) für MZ passend für Typen ES 250-2 und ETS 250. Es handelt sich um ein Originalteil. Der passende Dichtring hat unsere Bestellnummer 1859

DETAILS

MZ Nummer:
16-28.069

MZA-Artikelnr.:   84434    

Neue Vergasergehäusekappe passend für MZ der Typen ES 125, ES 150, ES 175/0, ES 175/1, ES 175/2, ES 250/0, ETS 125, ETS 150, TS 125, TS 150, ETZ 125, ETZ 150 mit Vergaser BING 53/24/201, BING 53/24/202. Lieferumfang: Abdeckplatte, Stellschraube inkl. Mutter

DETAILS

MZA-Artikelnr.:   84468    

DETAILS

MZA-Artikelnr.:   84462    

DETAILS

MZA-Artikelnr.:   84436    

DETAILS

DETAILS