Main page » MZ spare parts » ETZ 125, 150 » 2.3. Telescopic front fork

2.3. Telescopic front fork

Ersatzteilkatalog Fahrgestell Telegabel Reparatursatz MZ ETZ 125/150

Oil Seal 35X47X7

Artikel Nr.: 265

Bild Nr.: 27

1a Qualität
DETAILS

2,20 EUR

incl. 19% tax excl. Shipping costs

Oil sealings telescopic front fork MZ 35mm pair

Artikel Nr.: 124

Bild Nr.: 27

2 pieces sealing rings for fork, all MZ with 35 mm of fork pipe. Double lip ring 35x47x7. For all models ETZ. With TS measure please the diameter of the cross-beam, older models have 32 mm of diameter, these wave sealing rings have the order number 596.

DETAILS

MZ number: 96-60.375

6,20 EUR

incl. 19% tax excl. Shipping costs

Piston ring Pair of telescopic front fork MZ

Artikel Nr.: 1679

Bild Nr.: 10

New piston rings for the tele-fork suitably for all MZ ETZ and TS with 35 mm of fork.

DETAILS

MZ number: 22-22.274

4,00 EUR

incl. 19% tax excl. Shipping costs

Protective cap telescopic front fork MZ, Pair

Artikel Nr.: 361

Bild Nr.: 22

2 pieces (pair) of protective cap for tele-fork. For all MZ with fork pipe 35 mm and production tele-fork.

DETAILS

MZ number: 22-22.290

6,60 EUR

incl. 19% tax excl. Shipping costs

Repair set telescopic front fork MZ all small parts

Artikel Nr.: 1677

20-part repair set for all tele-forks of MZ ETZ and TS with 35 mm. In this set all small parts of the tele-fork are included. Consisting of: 2x protective cap, 2x oil seal 35x47x7 (high double lip), 2x supporting washer for final stop, 2x spring for final stop, 2x sealing washer, 2x circlip, 2x throttle valve, 2x valve washer, 2x spring for valve washer and 2x piston ring.

DETAILS

22,80 EUR

incl. 19% tax excl. Shipping costs

Repair set telescopic front fork MZ ETZ, TS with springs

Artikel Nr.: 523

Set to the repair of tele-forks. All parts anew, 1st quality. For all tele-forks with 35 mm of MZ, TS 125, TS 150, TS 250/1, ETZ 125, ETZ 150, ETZ 250, ETZ 251. Scope of supply: Set consists from: - 2x Main spring - 2x Cover cap - 2x Throttle valve - 2x Double lip ring - 0,5 l Fork oil The fork oil is ready for filling and must not be merged. It concerns special oil.

DETAILS

22,70 EUR

incl. 19% tax excl. Shipping costs

Repair set telescopic front fork MZ TS, ETZ, Small parts

Artikel Nr.: 390

10 - piece set passes of the most important small parts of the normal tele-forks MZ (35 mm), the models TS and ETZ. Contents: 2 pieces , throttle valve , piston ring , oil seal (Double lip), protwctive cap . These forks became used with all ETZ - models and with the TS250 / 1. With the models TS125, TS150 and TS250 there was during the production a model change of from 32 mm to 35 mm of tele-forks. The suitable special oil has the order number 030. For these forks you need a total of 3 bottles.

DETAILS

18,50 EUR

incl. 19% tax excl. Shipping costs

Repair set telescopic front fork MZ with telescopic gaiter

Artikel Nr.: 067

Repair set for the forks all MZ with fork diameter 35 mm (situation kind) of the models TS125 TS150, TS250, ETZ125, ETZ150, ETZ250, ETZ251, ETZ301. Contents: 500-600 ml fork oil, 2 Stück protective cap, 2 Stück valve washer, 2 Stück Double lip ring, 2 Stück telescopic gaiter.

DETAILS

29,80 EUR

incl. 19% tax excl. Shipping costs

Repair set telescopic front fork MZ, ETZ, TS, completely with telescopic gaiter

Artikel Nr.: 1968

23-part repair set for all tele-forks of MZ, models ETZ125, ETZ150, ETZ250, ETZ251, ETZ301 and TS250 / 1 with 35 mm of fork cross-beam diameter. In this set the most important parts are included for the complete repair of the tele-fork (for both pages).

Consisting of:
2x Telescopic gaiter, 2x Oil seal 35x47x7 (high double lip), 2x Supporting washer for final stop, 2x Spring for final stop, 2x Sealing washer, 2x Circlip, 2x Throttle valve, 2x Valve washer, 2x Spring for valve washer, 2x Piston ring, 2x Compression spring (not for sidecar operation) and special oil.

DETAILS

39,90 EUR

incl. 19% tax excl. Shipping costs

Rostrum on the right for telescopic fork (disk brake) ETZ

Artikel Nr.: 1914

Bild Nr.: 29
MZA-Artikelnr.: 15238-00M

Right rostrum for the cross-beam absorption of the tele-fork with attachment of the outer caliper of the models ETZ 125, 150, 250, 251, 301. It concerns a new, original MZ part, varnishes black (with bearing tracks).

DETAILS

MZ number: 30-22.047

Not available

Schraubensatz Fahrgestell komplett ETZ 125 150

Artikel Nr.: 12834

Neues Set Schrauben für den Rahmen passend für MZ ETZ 125 und ETZ 150. Dieser Satz enthält die notwendigen Senkkopf-, Innensechskant- und Sechskantschrauben, der Festigkeitsklasse 8.8. Außerdem sind die erforderlichen Muttern, Unterlegscheiben, Federscheiben und Federringe, sowie die Auspuffschrauben enthalten. Alle Teile sind verzinkt. Den Schraubensatz für den Motor erhalten Sie unter der Artikelnummer 1449. Das Set besteht aus 222 Teilen.
DETAILS

59,00 EUR

incl. 19% tax excl. Shipping costs

Sealing washer telescopic front fork MZ ETZ and TS

Artikel Nr.: 1351

Bild Nr.: 14

A pair of packing washers suitable for all telescopic front fork from MZ with a cross-beam diameter from 35mm.
Therefore for all ETZ models and all TS models with the 35mm fork (older models had a cross-beam diameter of 32 mm, there do not fit these disks).

DETAILS

MZ number: 00-18.210

2,10 EUR

incl. 19% tax excl. Shipping costs

Sechskantmutter verzinkt

Artikel Nr.: 1367

Mutter nach deutschem Industriestandard, verzinkte Ausführung.
DETAILS

Bitte gewünschte Größe auswählen:

from 0,20 EUR

incl. 19% tax excl. Shipping costs

Set cover cap for telescopic front fork and tax pipe MZ

Artikel Nr.: 1630

Bild Nr.: 1 3

New set of cover caps for the telescope fork suitably for all MZ with 35 mm of fork. This set passes of 2 caps for the screw plug tele-fork and 1 cap for the tax pipe.

DETAILS

MZ number: 13-22.133, 22-22.167

9,60 EUR

incl. 19% tax excl. Shipping costs

Set of compression springs for telescopic front fork MZ chromium-plates

Artikel Nr.: 1680

Bild Nr.: 13 18
4-part set chromium-plated compression springs for the tele-fork suitably with all MZ ETZ and TS with 35 mm of fork. 2 springs are for the valve disk (22-22.279) and 2 springs are for the end stop (22-22.280).

DETAILS

MZ number: 22-22.279, 22-22.280

4,30 EUR

incl. 19% tax excl. Shipping costs

Shock absorber - oil, fork oil MZ and Simson

Artikel Nr.: 030

DETAILS

4,65 EUR
23,25 EUR per litre

incl. 19% tax excl. Shipping costs

Shock Oil Addinol 1 litre

Artikel Nr.: 1071

DETAILS

7,20 EUR
7,20 EUR per litre

incl. 19% tax excl. Shipping costs

Spezial Dichtring für 35mm MZ ETZ und TS Gabel 3 Lippig 35x47x7 FKM

Artikel Nr.: 14312

Dieser Dichtring FKM braun ersetzt den Simmerring, Wellendichtring in der Telegabel. Und wird bei allen MZ TS125, TS150,TS250/1 ETZ125, ETZ150, ETZ250, ETZ251, ETZ300 eingesetzt.

Die 3 Dichtlippen werden auch in Hydraulik Systemen von Baggern und schwerer Industrie verwendet und dichten auch bei leicht eingelaufen Gleitflächen.

Hinweis zum Material:
Viton ist die Warenbezeichnung der DuPont Performance Elastomere für deren Fluorelastomere. Das relativ teure Viton® findet in der Technik Anwendung als Dichtungsmaterial mit hoher thermischer und chemischer Beständigkeit.
Im Gegensatz zu anderen Elastomeren hält es Kohlenwasserstoffen wie z. B. Ölen und Treibstoffen auch bei höheren Temperaturen stand ohne aufzuquellen oder sich aufzulösen. Viton wird aus Fluor und Kautschuk hergestellt. Die ISO-Kurzbezeichnung ist FKM, die DIN-Kurzbezeichnung FPM. Die Farbe spielt keine Rolle, dieser Kunststoff kann beliebig eingefärbt sein, meist braun, aber auch andere Farben möglich! Diese Qualität setzen wir selbst in unserer Werkstatt mit großem Erfolg ein!
DETAILS

3,90 EUR

incl. 19% tax excl. Shipping costs

Sprengring Telegabel 30x1,0 DIN 472 passend für MZ TS ETZ

Artikel Nr.: 5665

Bild Nr.: 17

DETAILS

0,40 EUR

incl. 19% tax excl. Shipping costs

Spring washer, explosive ring galvanized

Artikel Nr.: 1373

Feather disc in the best spring steel, German industrial standard and galvanised. For screws of 3 mm to 12 mm of diameter.

DETAILS

Please, click on the picture to determine the size.

from 0,20 EUR

incl. 19% tax excl. Shipping costs

Sticker ETZ 125 for guide tube

Artikel Nr.: 1299

New adhesive label for telescopic cross-beam MZ with the label ETZ 125 in the colour black/red/white. This adhesive label is ca. 23 cm long.

DETAILS

1,00 EUR

incl. 19% tax excl. Shipping costs

Sticker ETZ 150 for guide tube

Artikel Nr.: 1300

New adhesive label for telescopic cross-beam MZ with the label ETZ 150 in the colour black/red/white. This adhesive label is ca. 23 cm long.

DETAILS

1,80 EUR

incl. 19% tax excl. Shipping costs

Supporting tube telescopic front fork MZ ETZ, TS

Artikel Nr.: 2089

Bild Nr.: 11
New pipe for the tele-fork suitably with all models MZ ETZ and TS with 35 mm of fork.

DETAILS

MZ number: 22-22.266

20,00 EUR

incl. 19% tax excl. Shipping costs

Supporting washer for final stop telescopic front fork ETZ

Artikel Nr.: 1352

Bild Nr.: 12
Spare part for tele-forks TS and ETZ with cross-beam diameter of 35 mm. Therefore for all ETZ and later models TS.

DETAILS

MZ number: 22-22.277

3,00 EUR

incl. 19% tax excl. Shipping costs

Teleskopic gaiter MZ, one pair

Artikel Nr.: 173

Bild Nr.: 23
2 pieces (pair) of gaiter for suspension unit of the tele-fork for MZ ETZ and TS - types (ETZ125, ETZ150, ETZ250, TS150, TS250 ...). This protective rubber or cuffs is new and ca. 200 mm long, inside diameter possibly 42 mm and 33 mm. For all normal telescopic front forks with 35 mm of fork cross-beam.

DETAILS

MZ number: 22-22.289

9,30 EUR

incl. 19% tax excl. Shipping costs

26 to 50 (from a total of 54)